Script humidity and heating

[Danny]

Thanks, admin, for the setup.

It's true that I'm not controlling the room temperature, but the humidity.
This is for a pigeon enclosure where the humidity needs to be a certain value.

But this is not quite what I mean.
I'm missing the floor temperature, which shouldn't exceed 29 degrees Celsius.
And the frost protection, which also turns on the heating at 5 degrees Celsius, until the indoor temperature reaches a maximum of 7 degrees Celsius.

I don't understand the setup with the setpoint min, med, and max, because I only have one humidity setpoint to control and the ventilation has fixed positions and And are not customizable by the end customer

Thanks in advance.