01.04.2026, 10:50
(31.03.2026, 10:09)admin Wrote: If your device does not start then most likely you need to replace the micro SD card. Use a new card up to 32GB, preferably industrial or high endurance.
Follow this guide and use recovery image for old CPU (i.MX28): https://kb.logicmachine.net/misc/reflash...ng-player/
You can find firmware here: https://logicmachine.net/downloads#firmware
Look for LogicMachine firmware version 2024.04 / LM Wall (Ambient)
I think the board that controls the LAN port is burned out. We tried powering the 24V input, but the board flickered once and then that was it.
We tried replacing the flash drive, but to no avail.