scripting knx

[ALEJANDRO]

Let me explain. I have a series of IP addresses that I need to check:
- Portal 1 IP: 192.168.0.11 on 32/3/14

- Portal 2 IP: 192.168.0.12 on 32/3/15

- Portal 3 IP: 192.168.0.13 on 32/3/16

- Garage IP: 192.168.0.16 on 32/3/17

If a ping is successful and there is communication, the idea is to set IP addresses 32/3/14, 15, 16, and 17 to 1.

If there is no communication after the ping, the idea is to trigger alarms stored on the following addresses by setting these addresses to 1:
- Portal 1_Alarm IP on 32/3/27

- Portal 2_Alarm IP on 32/3/28
-ip portal 3_Alarma on 32/3/29

-ip Garaje_Alarma on 32/3/30

This IP monitoring process depends on two variables:

frec_test_comms 32/3/40 = 1
Enable_Test_IP 32/3/41 = 1