Today, 06:43
You can use trends logs for this if the object does not change very often since the current value is sampled once per minute.
Assign a trend to a binary object, use Absolute value / Average mode / 1 hour resolution / 3 decimal places. The resulting trend values will show how much of time selected time period the object was in ON state (for example 0.5 = 30 minutes per hour).
Assign a trend to a binary object, use Absolute value / Average mode / 1 hour resolution / 3 decimal places. The resulting trend values will show how much of time selected time period the object was in ON state (for example 0.5 = 30 minutes per hour).