Yesterday, 10:42
Hi
I have been testing the Danalock together with LM5 and it is working fine, I can lock and unlock (Door control), read the status if it is locked or unlock (Lock state) and read the battery level.
The Door state I cant se any change on, but I beleve it is related to that the lock dont have any input of the door is open or closed.
I also have an Danapad that I would like to use together with Danalock V3, I now different "smart hub's" have support to set pin code through the Danalock V3.
The pin codes are stored in Danapad, by using something called Appless pairing between the Danalock and Danapad, it is possable to set pin codes through the zigbee protocoll.
Is it possable to add that functionallity? and is it needed to be done with a script?
Here is some infomation on this topic:
Pin code (composite)
Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"pin_code": {"user": VALUE, "user_type": VALUE, "user_enabled": VALUE, "pin_code": VALUE}} To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"pin_code": ""}.
user (numeric): User ID to set or clear the pincode for
user_type (enum): Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock allowed values: unrestricted, year_day_schedule, week_day_schedule, master, non_access
user_enabled (binary): Whether the user is enabled/disabled allowed values: true or false
pin_code (numeric): Pincode to set, set pincode to null to clear
The text is coming from:
https://www.zigbee2mqtt.io/devices/V3-BT...-composite
I have been testing the Danalock together with LM5 and it is working fine, I can lock and unlock (Door control), read the status if it is locked or unlock (Lock state) and read the battery level.
The Door state I cant se any change on, but I beleve it is related to that the lock dont have any input of the door is open or closed.
I also have an Danapad that I would like to use together with Danalock V3, I now different "smart hub's" have support to set pin code through the Danalock V3.
The pin codes are stored in Danapad, by using something called Appless pairing between the Danalock and Danapad, it is possable to set pin codes through the zigbee protocoll.
Is it possable to add that functionallity? and is it needed to be done with a script?
Here is some infomation on this topic:
Pin code (composite)
Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"pin_code": {"user": VALUE, "user_type": VALUE, "user_enabled": VALUE, "pin_code": VALUE}} To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"pin_code": ""}.
user (numeric): User ID to set or clear the pincode for
user_type (enum): Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock allowed values: unrestricted, year_day_schedule, week_day_schedule, master, non_access
user_enabled (binary): Whether the user is enabled/disabled allowed values: true or false
pin_code (numeric): Pincode to set, set pincode to null to clear
The text is coming from:
https://www.zigbee2mqtt.io/devices/V3-BT...-composite