09.08.2017, 09:36
Hi
this is the same problem as acking / ignoring telegrams not processed in LM. Or lack of dummy object. If you have five KNX devices on the bus then it doesn't matter. If you have hundreds of devices in ten lines then missing priorities can be a problem in such cases.
this is the same problem as acking / ignoring telegrams not processed in LM. Or lack of dummy object. If you have five KNX devices on the bus then it doesn't matter. If you have hundreds of devices in ten lines then missing priorities can be a problem in such cases.
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259