Hi!
I have a problem.
I use spacelYnk gateway and I want to use it as a slave from KNX to Modbus TCP in StruxureWare Building Operation.
I used 'AN016_spaceLYnk_as_a_Modbus_slave' document for example. Despite the corect connect i have problem with read and send registers.
Can I get help with scripting. Could anyone to explain step by step how to solve below tasks:
1 - I want to read value from KNX group (ex. 0/1/0) on Modbus Register Input.
2 - Sent value from Modbus Register Output to variable in spacelYnk group (ex. 0/1/5)
Kind regards
I have a problem.
I use spacelYnk gateway and I want to use it as a slave from KNX to Modbus TCP in StruxureWare Building Operation.
I used 'AN016_spaceLYnk_as_a_Modbus_slave' document for example. Despite the corect connect i have problem with read and send registers.
Can I get help with scripting. Could anyone to explain step by step how to solve below tasks:
1 - I want to read value from KNX group (ex. 0/1/0) on Modbus Register Input.
2 - Sent value from Modbus Register Output to variable in spacelYnk group (ex. 0/1/5)
Kind regards