Dear All, let me provide you some additional info, describing Satel APP advantages:
1) Satel INT-KNX2 module can be used to integrate Satel Secure System Integra into Smart Home & IoT Systems, but it has some limitations. At each module up to 64 KNX group addresses can be configured. To pass throug this module the state of each secure zone, four KNX objects should be used - ready, violated, bypassed and alarmed.
For example we have Secure System Integra with 35 zones, to control all states of these zones from Smart Home Visualisation we have to configure 140 group KNX addresses. But Satel INT-KNX2 module limit is 64.
You say - put into project three INT-KNX-V2 modules - yes, it is possible, but we will met another Satel Secure System Integra limitation - becasue of each KNX group address is connected to separated Satel virtual output, depend on type of Integra (32/64/128 or 256) the number of virtual outputs is limited by 32/64/128 and 256 correspondingly.
For example we have object with 40 real secure zones and Integra 64 can be used to secure object without Smart Home integration. To integrate this secure system into Smart Home and provide home owners ability of checking states of all zones from iPad, we will be forced to add four Satel INT-KNX V2 modules (40 zones * 4 states = 160 objects). Besides that each KNX objects in that case should correspond Satel virtual output - as result 160 outputs. That fact forces us to purchase more expensive Integra 256 Plus. To resolve this Integration task using our application, only INT-ETHM 1 Plus module and Satel APP should be purchased.
2) INT-KNX V2 module unable to extract Secure System event log. Satel APP is able. You can display all events at visualisation or store to external system for analysis (additional scripting is required).
3) You can use cheap (in front of KNX) Satel movement, window and water sensors in connections with KNX actuators to provide end users more cost effective and functional solutions.
For the moment we put into projects both modules: INT-KNX V2 - for critical events and control and INT-ETHM 1 Plus for visualisation and event log, But Satel APP allows to use the only INT-ETHM 1 Plus module.
Please check attachment with real example of integration, working from 2016 and application configurator interface.
For ordering please contact: apps.shop@lm.net.ru
The cost of application is 215 USD. Discount certificates are also available.
1) Satel INT-KNX2 module can be used to integrate Satel Secure System Integra into Smart Home & IoT Systems, but it has some limitations. At each module up to 64 KNX group addresses can be configured. To pass throug this module the state of each secure zone, four KNX objects should be used - ready, violated, bypassed and alarmed.
For example we have Secure System Integra with 35 zones, to control all states of these zones from Smart Home Visualisation we have to configure 140 group KNX addresses. But Satel INT-KNX2 module limit is 64.
You say - put into project three INT-KNX-V2 modules - yes, it is possible, but we will met another Satel Secure System Integra limitation - becasue of each KNX group address is connected to separated Satel virtual output, depend on type of Integra (32/64/128 or 256) the number of virtual outputs is limited by 32/64/128 and 256 correspondingly.
For example we have object with 40 real secure zones and Integra 64 can be used to secure object without Smart Home integration. To integrate this secure system into Smart Home and provide home owners ability of checking states of all zones from iPad, we will be forced to add four Satel INT-KNX V2 modules (40 zones * 4 states = 160 objects). Besides that each KNX objects in that case should correspond Satel virtual output - as result 160 outputs. That fact forces us to purchase more expensive Integra 256 Plus. To resolve this Integration task using our application, only INT-ETHM 1 Plus module and Satel APP should be purchased.
2) INT-KNX V2 module unable to extract Secure System event log. Satel APP is able. You can display all events at visualisation or store to external system for analysis (additional scripting is required).
3) You can use cheap (in front of KNX) Satel movement, window and water sensors in connections with KNX actuators to provide end users more cost effective and functional solutions.
For the moment we put into projects both modules: INT-KNX V2 - for critical events and control and INT-ETHM 1 Plus for visualisation and event log, But Satel APP allows to use the only INT-ETHM 1 Plus module.
Please check attachment with real example of integration, working from 2016 and application configurator interface.
For ordering please contact: apps.shop@lm.net.ru
The cost of application is 215 USD. Discount certificates are also available.