hi
i try to connect with a plc tm 2412 schneider , the network is modbus tcp. i create a json with only one variable . first i tested the variable from spacelyn with an other device( linkbox) and working after i testing the plc with with linkbox and it working but the plc with spacelynk can not connect . the json is "mapping": [
{ "name": "Input 1", "bus_datatype": "float16", "type": "inputregister", "address": 1, "value_multiplier": 0.001, "units": "V"}
]
}
any help acceptable with appreciation.
i try to connect with a plc tm 2412 schneider , the network is modbus tcp. i create a json with only one variable . first i tested the variable from spacelyn with an other device( linkbox) and working after i testing the plc with with linkbox and it working but the plc with spacelynk can not connect . the json is "mapping": [
{ "name": "Input 1", "bus_datatype": "float16", "type": "inputregister", "address": 1, "value_multiplier": 0.001, "units": "V"}
]
}
any help acceptable with appreciation.