This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

CanX UIO8 (8 Universal IO ports + LoRa) (0.2)
#5
(11.04.2019, 19:42)AEK Wrote: sorry, my english is not well, so if I mistake Admin and Edgar will fix my words.

if you short circut the output and GND clamp this channel will go to fault mode. it will go to "off" state until you restart device by power supply. 


but with configuration on your screen if you will control relay you will have real status of output chanel, because input use other pins of device CPU

So it is a better solution input as status object than just using the output status object of the output?
Reply


Messages In This Thread
RE: CanX UIO8 (8 Universal IO ports + LoRa) (0.2) - by Kai-Roger - 11.04.2019, 19:52

Forum Jump: