08.10.2016, 12:05
(This post was last modified: 12.10.2016, 12:30 by phongvucba.)
!Hello everybody!
Everyone who does not use a USB 3G? According to this article should complement how much power is enough A (5V 2A or 5V 1A)
http://openrb.com/example-knxeib-bus-con...s-via-sms/
When plugged into the USB on LM3: two light signal lights (lights of LM3), and then reboot. Ok. There must be a high-powered USB too?
When we add this code:
os.execute ('echo 1> /sys/bus/platform/devices/ci_hdrc.0/force_full_speed')
os.execute ('echo 1> /sys/bus/platform/devices/ci_hdrc.1/force_full_speed')
os.execute ('usbreset / dev / bus / usb / 001/001')
but still reported in the System log: full-speed USB set to
This code on LM3 Reactor 2 or 3 correct?
Thanks everyone !