This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

SpaceLynk and Wiser For Knx BACnet release
#1
Hi all,

can you tell me which current firmware includes BACnet for SpacelYnk and Wiser For Knx?

Where can I download an official version ?




Thank's in advance for your answer.
All the best from France.
Reply
#2
All of them had it. Download it from se.com
------------------------------
Ctrl+F5
Reply
#3
Ok ... BACnet server is native in SpaceLynk!
Thank you Daniel
Reply
#4
Hi,

Here you can find the latest FW for spaceLYnk:

HW1 (reset button on the back)

https://download.schneider-electric.com/...W_1_X_X-sL

HW2/3 (reset button on the front)

https://download.schneider-electric.com/...W_3_X_X-sL

BR,

Erwin
Reply
#5
Dear Erwin,

I installed the package "Wiser_for_KNX-2.4.0_hw1.xx.img" on my Wiser For Knx  "2.3.0", and then, after a reeboot, it's always the same "2.3.0" release number writed à the botton left of the creen !

PS: after new firmware upload : 2.3.0 / Flashsys v2 / ©2008-2018

Any reasons ?
Thank's in advance...
Reply
#6
clear browser cache
------------------------------
Ctrl+F5
Reply
#7
same thing...
The "system > Firmware Upgrade" indicate "SW 2.3.0" !
Reply
#8
card in read only mode?
------------------------------
Ctrl+F5
Reply
#9
Which card ? I have already made several firmware updates without any problem...
Reply
#10
Change any system settings, press sync and then reboot. Check if this what was changed is still there.
------------------------------
Ctrl+F5
Reply
#11
(09.10.2019, 13:23)Daniel. Wrote: Change any system settings, press sync and then reboot. Check if this what was changed is still there.

I have the same problem with spacelynk imx28 of a customer version 2.1.1 that could not upgrade to 2.4 hw1.

The upgrade process running well.

But after still in 2.1.1.

I would try to 2.3 but can't find in hw1. Only broken link:
https://www.se.com/es/es/faqs/FA322491/


I already try the cache, change settings, sync...


any idea ?
-----------
FRANCE SMARTHOME & SMARTBUILDING INTEGRATION
SE ECO EXPERT
Reply
#12
The SD card is most likely in read only mode and has to be replaced.
------------------------------
Ctrl+F5
Reply
#13
(20.02.2020, 20:20)Daniel. Wrote: The SD card is most likely in read only mode and has to be replaced.

ok thank you, I will check the tutorial.

But just a question:
- I can modify the program... (stored in flash ??)
- I didn't have a message in log

EDIT:
I found in system log:
Code:
Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.295589] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.295415] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.293130] EXT4-fs (mmcblk0p2): recovery complete
Feb 20 19:44:47 fca-knx kern.info kernel: [ 0.854610] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Feb 20 19:44:47 fca-knx kern.info kernel: [ 0.854553] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly
-----------
FRANCE SMARTHOME & SMARTBUILDING INTEGRATION
SE ECO EXPERT
Reply
#14
In this HW everything is stored in SD, there was no SPI flash on imx28.
------------------------------
Ctrl+F5
Reply


Forum Jump: