Posts: 411
Threads: 103
Joined: Oct 2016
Reputation:
9
Hi all
I'd like to show a user an object log for just one object in my visu. Is it possible?
I know I can show data for trends. But I've not found a way how to do it in case the object has no trend.
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Posts: 1764
Threads: 6
Joined: Jul 2015
Reputation:
117
Hi,
When there is no trend attached to the object or the object log is not enabled on this object there is no historical data available for this object anywhere in the system.
You could store historical data to a table in the storage and call it from a .lp file, but i would use a trend as this is the easiest way to do it..
BR,
Erwin
Posts: 106
Threads: 40
Joined: Sep 2017
Reputation:
0
search for eventlog
KNX Advanced Partner + Tutor
Posts: 7764
Threads: 42
Joined: Jun 2015
Reputation:
447
.lp file example. Pass object address/name like this: /user/logs.lp?obj=1/1/1
The number of log entries is limited to 100. You can change this value in query if needed.
Code: <?
require('apps')
alias = getvar('obj') or ''
obj = grp.find(alias)
if not obj then
print('object not found')
return
end
?>
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8">
<title>Object logs</title>
<link rel="stylesheet" href="/apps/css/bootstrap.css">
<style>
.table { table-layout: fixed; }
</style>
</head>
<body>
<table class="table">
<tr>
<th>Date/time</th>
<th>Source</th>
<th>Event type</th>
<th>Value</th>
</tr>
<?
query = 'SELECT * FROM objectlog WHERE address=? ORDER BY id DESC LIMIT 100'
items = db:getall(query, obj.id)
for _, item in ipairs(items) do
datetime = os.date('%c', item.logtime)
if item.src > 0 then
src = buslib.decodeia(item.src)
else
src = 'local'
end
if item.eventtype == 'write' then
value = busdatatype.decode(item.datahex, obj.datatype)
else
value = ''
end
?>
<tr>
<td><?=escape(datetime)?></td>
<td><?=escape(src)?></td>
<td><?=escape(item.eventtype)?></td>
<td><?=escape(value)?></td>
</tr>
<? end ?>
</table>
</body>
</html>
Posts: 411
Threads: 103
Joined: Oct 2016
Reputation:
9
13.02.2020, 17:38
(This post was last modified: 13.02.2020, 17:39 by Thomas.)
(13.02.2020, 08:34)admin Wrote: .lp file example. Pass object address/name like this: /user/logs.lp?obj=1/1/1
The number of log entries is limited to 100. You can change this value in query if needed.
Thank you for the file. But there is few issues.
buslib.encodeia(item.src) doesn't work at all. My KNX object which is source of the log record has address 1.3.63.
item.src = 46081
Result of buslib.encodeia(46081) is nil.
I thought there should be buslib.decodeia(item.src) instead of encode. But it doesn't work either. buslib.decodeia(46081) returns 11.4.1 so it looks like there's a bit ordering mismatch etc.
The second problem is:
busdatatype.decode(item.datahex, obj.datatype) returns only basic datatypes. But I'd like to see fully decoded values. Like switch on/off, open/close etc. Is it possible?
In attachments below I'm sending you what I see in log and what's on this newly created page.
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Posts: 7764
Threads: 42
Joined: Jun 2015
Reputation:
447
Right, it should be buslib.decodeia() instead of buslib.encodeia(). As for wrong address 1.3.63 is 4927 in integer form. You've probably mistaken it with 22/4/1 which is 46081 in integer form.
There are no server-side function for decoding sub-datatypes apart from scaling and angle. You can write your own conversion function if needed.
Posts: 1764
Threads: 6
Joined: Jul 2015
Reputation:
117
14.02.2020, 20:16
(This post was last modified: 17.02.2020, 20:19 by Erwin van der Zwart.)
Hi,
Try this:
1) Run code below once to create the logs.lp
2) To have normal decoding use http://<ip>/user/logs.lp?obj=1/1/1
3) To use the custom values during decoding http://<ip>/user/logs.ip?obj=1/1/1&custom=true
4) To reduce or increase the number of lines (default 100) use http://<ip>/user/logs.ip?obj=1/1/1&lines=20 or http://<ip>/user/logs.ip?obj=1/1/1&custom=true&lines=20
Code: dst = '/www/user/logs.lp'
io.writefile(dst, [[
<?
require('apps')
alias = getvar('obj') or ''
custom = getvar('custom') or 'false'
lines = tonumber(getvar('lines')) or 100
obj = grp.find(alias)
if not obj then
print('object not found')
return
end
function decodevalue(obj, value)
if obj.enums and custom == 'true' then
require('json')
enums = json.pdecode(obj.enums)
if type(value) == 'boolean' then
if value == true then
value = enums['1']
else
value = enums['0']
end
else
value = enums[tostring(value)]
end
if value == nil or value == '' then
value = enums['default']
end
else
dt = {
[1] = {
dttype = 'boolean',
enums = {
[true] = 'true',
[false] = 'false'
}
},
[1001] = {
dttype = 'switch',
enums = {
[true] = 'on',
[false] = 'off'
}
},
[1002] = {
dttype = 'boolean',
enums = {
[true] = 'true',
[false] = 'false'
}
},
[1003] = {
dttype = 'enable',
enums = {
[true] = 'enable',
[false] = 'disable'
}
},
[1004] = {
dttype = 'transition',
enums = {
[true] = 'ramp',
[false] = 'no ramp'
}
},
[1005] = {
dttype = 'alarm',
enums = {
[true] = 'alarm',
[false] = 'no alarm'
}
},
[1006] = {
dttype = 'low/high',
enums = {
[true] = 'high',
[false] = 'low'
}
},
[1007] = {
dttype = 'step',
enums = {
[true] = 'increase',
[false] = 'decrease'
}
},
[1008] = {
dttype = 'up/down',
enums = {
[true] = 'up',
[false] = 'down'
}
},
[1009] = {
dttype = 'open/close',
enums = {
[true] = 'close',
[false] = 'open'
}
},
[1010] = {
dttype = 'start/stop',
enums = {
[true] = 'start',
[false] = 'stop'
}
},
[1011] = {
dttype = 'activity',
enums = {
[true] = 'active',
[false] = 'inactive'
}
},
[1012] = {
dttype = 'inversion',
enums = {
[true] = 'inverted',
[false] = 'not inverted'
}
},
[1013] = {
dttype = 'dim style',
enums = {
[true] = 'cyclically',
[false] = 'start/stop'
}
},
[1014] = {
dttype = 'data source',
enums = {
[true] = 'calculated',
[false] = 'fixed'
}
},
[2] = {
dttype = '2 bit (1 bit controlled)',
enums = {
[0] = 'No control, 0',
[1] = 'No control, 1',
[2] = 'Control, 0',
[3] = 'Control, 1'
}
},
[3] = {
dttype = '4 bit (3 bit controlled)',
enums = {
[0] = 'No control, Break',
[1] = 'No control, Step 1',
[2] = 'No control, Step 2',
[3] = 'No control, Step 3',
[4] = 'No control, Step 4',
[5] = 'No control, Step 5',
[6] = 'No control, Step 6',
[7] = 'No control, Step 7',
[8] = 'Control, Break',
[9] = 'Control, Step 1',
[10] = 'Control, Step 2',
[11] = 'Control, Step 3',
[12] = 'Control, Step 4',
[13] = 'Control, Step 5',
[14] = 'Control, Step 6',
[15] = 'Control, Step 7',
}
},
[3007] = {
dttype = '4 bit dim/blinds step',
enums = {
[0] = 'Stop',
[1] = 'Down 100%',
[2] = 'Down 50%',
[3] = 'Down 25%',
[4] = 'Down 12%',
[5] = 'Down 6%',
[6] = 'Down 3%',
[7] = 'Down 1%',
[8] = 'Stop',
[9] = 'Up 100%',
[10] = 'Up 50%',
[11] = 'Up 25%',
[12] = 'Up 12%',
[13] = 'Up 6%',
[14] = 'Up 3%',
[15] = 'Up 1%',
}
}
}
if dt[obj.datatype] then
value = dt[obj.datatype]['enums'][value]
end
end
return value
end
?>
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8">
<title>Object logs</title>
<link rel="stylesheet" href="/apps/css/bootstrap.css">
<style>
.table { table-layout: fixed; }
</style>
</head>
<body>
<table class="table">
<tr>
<th>Date/time</th>
<th>Source</th>
<th>Event type</th>
<th>Value</th>
</tr>
<?
query = 'SELECT * FROM objectlog WHERE address=? ORDER BY id DESC LIMIT ?'
items = db:getall(query, obj.id, lines)
for _, item in ipairs(items) do
datetime = os.date('%c', item.logtime)
if item.src > 0 then
src = buslib.decodeia(item.src)
else
src = 'local'
end
if item.eventtype == 'write' then
value = busdatatype.decode(item.datahex, obj.datatype)
value = decodevalue(obj, value)
else
value = ''
end
?>
<tr>
<td><?=escape(datetime)?></td>
<td><?=escape(src)?></td>
<td><?=escape(item.eventtype)?></td>
<td><?=escape(value)?></td>
</tr>
<? end ?>
</table>
<script type="text/javascript">
var itemsdata = <? json.write(items) ?>;
//console.log(itemsdata);
</script>
</body>
</html>
]])
script.disable(_SCRIPTNAME)
BR,
Erwin
Posts: 411
Threads: 103
Joined: Oct 2016
Reputation:
9
17.02.2020, 14:47
(This post was last modified: 17.02.2020, 14:51 by Thomas.)
Thank you, works well.
FYI 1009 is wrong. I think it's for Nobel price for someone who invented it but according to KNX specs the correct setting is:
[1009] = {
dttype = 'open/close',
enums = {
[false] = 'open',
[true] = 'close'
}
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Posts: 99
Threads: 39
Joined: Apr 2018
Reputation:
0
I have the code working fine although been trying to mod (unsuccessfully) I would like to know how I can adjust the coding to give me.
1. Be able display all logged events
2. Be able to provide the user the ability to filter logs. Like using a custom value set against an 2 byte integer (where 0= 1/1/1, 1=1/1/3, 2=32/1/5) where they can choose which group to list, would be nice if the custom value list could automatically be generated / updated with group addresses that have been selected to be logged.
3. To show in the list the actual group address against each event.
Thanks for any suggestions.
|
