SpaceLynk and Wiser For Knx BACnet release

[SigmaTec]

Hi all,

can you tell me which current firmware includes BACnet for SpacelYnk and Wiser For Knx?

Where can I download an official version ?




Thank's in advance for your answer.
All the best from France.

[Daniel]

All of them had it. Download it from se.com

[SigmaTec]

Ok ... BACnet server is native in SpaceLynk!
Thank you Daniel

[Erwin van der Zwart]

Hi,

Here you can find the latest FW for spaceLYnk:

HW1 (reset button on the back)

https://download.schneider-electric.com/...W_1_X_X-sL

HW2/3 (reset button on the front)

https://download.schneider-electric.com/...W_3_X_X-sL

BR,

Erwin

[SigmaTec]

Dear Erwin,

I installed the package "Wiser_for_KNX-2.4.0_hw1.xx.img" on my Wiser For Knx  "2.3.0", and then, after a reeboot, it's always the same "2.3.0" release number writed à the botton left of the creen !

PS: after new firmware upload : 2.3.0 / Flashsys v2 / ©2008-2018

Any reasons ?
Thank's in advance...

[Daniel]

clear browser cache

[SigmaTec]

same thing...
The "system > Firmware Upgrade" indicate "SW 2.3.0" !

[Daniel]

card in read only mode?

[SigmaTec]

Which card ? I have already made several firmware updates without any problem...

[Daniel]

Change any system settings, press sync and then reboot. Check if this what was changed is still there.

[domotiqa]

Change any system settings, press sync and then reboot. Check if this what was changed is still there.

I have the same problem with spacelynk imx28 of a customer version 2.1.1 that could not upgrade to 2.4 hw1.

The upgrade process running well.

But after still in 2.1.1.

I would try to 2.3 but can't find in hw1. Only broken link:
https://www.se.com/es/es/faqs/FA322491/


I already try the cache, change settings, sync...


any idea ?

[Daniel]

The SD card is most likely in read only mode and has to be replaced.

[domotiqa]

The SD card is most likely in read only mode and has to be replaced.

ok thank you, I will check the tutorial.

But just a question:
- I can modify the program... (stored in flash ??)
- I didn't have a message in log

EDIT:
I found in system log:

Code:

Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.295589] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.295415] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.293130] EXT4-fs (mmcblk0p2): recovery complete
Feb 20 19:44:47 fca-knx kern.info kernel: [ 0.854610] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Feb 20 19:44:47 fca-knx kern.info kernel: [ 0.854553] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly

[Daniel]

In this HW everything is stored in SD, there was no SPI flash on imx28.