1wire - Basic Script

[maryantudor@gmail.com]

Hello,

I want kindly to ask you for a simple script 1wire example that will:

- contain a function with 2 parameters (location, sensor address)
- read the temperature value from a DS18b20 sensor every 60s
- print and return the temperature value

Also please let me if it's any documentation where I can find how to manage 1wire sensor via scripts (Lua scripts) or directly from LM UI....

Thank you in advance!

[admin]

You can do all this from the UI. Why do you need a script?

[maryantudor@gmail.com]

You can do all this from the UI. Why do you need a script?

I tried to build a thermostat function inside of a resident script. So a need to have inside a function that will read (every n minutes ) the temperature from each location and it will return the temperature base on location and the address of each location. 

Do you think that it's an easy way to build a thermostat function base on DS18b20 temperature sensors? 

Thank you for your support

[admin]

You can use grp.getvalue() in your script to get current temperature object values. For improved reliability we recommend using 1-wire sensors with 5V power supply. In some cases you might need a small capacitor between 5V and GND close to the sensor.

[maryantudor@gmail.com]

You can use grp.getvalue() in your script to get current temperature object values. For improved reliability we recommend using 1-wire sensors with 5V power supply. In some cases you might need a small capacitor between 5V and GND close to the sensor.

Thank you for your support!