This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

SNMP for UPS SHTYL (SW250/SW500/SW1000)
#1
Code:
--UPS SHTYL (SW250/SW500/SW1000) --IC-SNMP/Web --MIB (https://www.shtyl.ru/upload/iblock/74f/Shtyl_MIB_UPS2_06.mib) ups_ip = "192.168.0.1" Connection_status = "1/6/25" DataUPS = {} DataUPS[1] = {oid=".1.3.6.1.2.1.33.1.2.1.0", knx_grop="1/6/26", dtype=5} -- upsBatteryStatus{unknown(1),batteryNormal(2),batteryLow(3),batteryDepleted(4)} DataUPS[2] = {oid=".1.3.6.1.2.1.33.1.2.2.0", knx_grop="1/6/27", dtype=99} -- upsSecondsOnBattery --(Datatype 9, value Hours.minutes) DataUPS[3] = {oid=".1.3.6.1.2.1.33.1.2.3.0", knx_grop="1/6/28", dtype=7} -- upsEstimatedMinutesRemaining DataUPS[4] = {oid=".1.3.6.1.2.1.33.1.2.4.0", knx_grop="1/6/29", dtype=7} -- upsEstimatedChargeRemaining DataUPS[5] = {oid=".1.3.6.1.2.1.33.1.2.5.0", knx_grop="1/6/30", dtype=9} -- upsBatteryVoltage DataUPS[6] = {oid=".1.3.6.1.2.1.33.1.2.6.0", knx_grop="1/6/31", dtype=9} -- upsBatteryCurrent DataUPS[7] = {oid=".1.3.6.1.2.1.33.1.2.7.0", knx_grop="1/6/32", dtype=7} -- upsBatteryTemperature DataUPS[8] = {oid=".1.3.6.1.2.1.33.1.3.3.1.2.1", knx_grop="1/6/33", dtype=9} -- upsInputFrequency DataUPS[9] = {oid=".1.3.6.1.2.1.33.1.3.3.1.3.1", knx_grop="1/6/34", dtype=7} -- upsInputVoltage DataUPS[10] = {oid=".1.3.6.1.2.1.33.1.3.3.1.4.1", knx_grop="1/6/35", dtype=9} -- upsInputCurrent DataUPS[11] = {oid=".1.3.6.1.2.1.33.1.4.1.0", knx_grop="1/6/36", dtype=5} -- upsOutputSource {other(1),none(2),normal(3),bypass(4),battery(5),booster(6),reducer(7)} DataUPS[12] = {oid=".1.3.6.1.2.1.33.1.4.2.0", knx_grop="1/6/37", dtype=9} -- upsOutputFrequency DataUPS[13] = {oid=".1.3.6.1.2.1.33.1.4.4.1.2.1", knx_grop="1/6/38", dtype=7} -- upsOutputVoltage DataUPS[14] = {oid=".1.3.6.1.2.1.33.1.4.4.1.3.1", knx_grop="1/6/39", dtype=9} -- upsOutputCurrent DataUPS[15] = {oid=".1.3.6.1.2.1.33.1.4.4.1.5.1", knx_grop="1/6/40", dtype=7} -- upsOutputPercentLoad DataUPS[16] = {oid=".1.3.6.1.2.1.33.1.5.1.0", knx_grop="1/6/41", dtype=9} -- upsBypassFrequency DataUPS[17] = {oid=".1.3.6.1.2.1.33.1.5.3.1.2.1", knx_grop="1/6/42", dtype=7} -- upsBypassVoltage DataUPS[18] = {oid=".1.3.6.1.2.1.33.1.5.3.1.3.1", knx_grop="1/6/43", dtype=9} -- upsBypassCurrent DataUPS[19] = {oid=".1.3.6.1.2.1.33.1.6.1", knx_grop="1/6/44", dtype=1} -- upsAlarmsPresent --oid=".1.3.6.1.2.1.33.1.3.3.1.5.1" -- upsInputTruePower --oid=".1.3.6.1.2.1.33.1.4.4.1.4.1" -- upsOutputPower --oid=".1.3.6.1.2.1.33.1.5.3.1.4.1" -- upsBypassPower require "snmp" local mib, err = snmp.mib.load('/home/ftp/snmp/UPS-MIB.mib') if not mib then    --log('Failed to load mib: ' .. err) end ups1, err = snmp.open{   version = snmp.SNMPv2,   community = "public",   port = 161,   peer = ups_ip, } if ups1 then grp.checkwrite(Connection_status, 1)      for i=1,19 do     vbind, err = ups1:get(DataUPS[i].oid)   if (vbind.value ~= nil) then     res = vbind.value   end   if ((DataUPS[i].dtype == 9) and (i~=5)) then res = res * 0.1 end   if i == 2 then     hour = vbind.value/60     hour = math.floor(hour)     min = vbind.value%60     res=hour+(min*0.01)   end   if i == 19 then     if res ~= 0 then res = 1 end   end   grp.checkwrite(DataUPS[i].knx_grop, res) end   else   grp.checkwrite(Connection_status, 0) end  ups1:close()
Reply


Forum Jump: