Setpoint direct modification

[josep]

Hello, I need to change setpoint value via direct button. my idea is up or down 1ºC every time that I push the button, it is possible directly from LM using aditional classes or scripts? THX.

Josep.

[FatMax]

Hello, I need to change setpoint value via direct button. my idea is up or down 1ºC every time that I push the button, it is possible directly from LM using aditional classes or scripts? THX.

Josep.

Put this in a event for the button. Change + with - for decreasing set point. Fill in top two with corresponding group address.

Code:

value = grp.getvalue('x/x/x') -- Current value
send = 'x/x/x' -- Setpoint input

newvalue = value + 1

grp.write(send, newvalue)

[admin]

Or if you map it to a binary object, you can do +/- with a single script and 2 buttons in send fixed value mode.

Code:

offset = event.getvalue() and 1 or -1
setpoint = grp.getvalue('1/1/1')
grp.write('1/1/1', setpoint + offset)

[FatMax]

Or if you map it to a binary object, you can do +/- with a single script and 2 buttons in send fixed value mode.

Code:

offset = event.getvalue() and 1 or -1
setpoint = grp.getvalue('1/1/1')
grp.write('1/1/1', setpoint + offset)

Clever!