This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.
Logic Machine Forum › LogicMachine eco-system › Hardware v
1Wire Sensor

Threaded Mode
1Wire Sensor
gowlogic Offline
Junior Member
Posts: 6
Threads: 2
Joined: Jan 2016
Reputation: 0
#1
14.01.2016, 15:04
Hello Edgar,

i have 2 1-Wire Sensors and conntected one of them on the reactor V2, but it didn't work.
I got the Message Disabled!

Please can you help me?

Thanks Alex

Attached Files Thumbnail(s)
   
Find
Reply
admin Offline
Administrator
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation: 447
#2
15.01.2016, 05:40
Do you get configuration form when you click the sensor row in 1-wire table? If so, you have to set "Poll interval" to something more than zero, 5-15 seconds or so, map object to sensor value. If it tells you that support for this device is not implemented, please contact our support. Family ID 10 is supported in current beta firmware.
Find
Reply
gowlogic Offline
Junior Member
Posts: 6
Threads: 2
Joined: Jan 2016
Reputation: 0
#3
15.01.2016, 06:21
(15.01.2016, 05:40)admin Wrote: Do you get configuration form when you click the sensor row in 1-wire table? If so, you have to set "Poll interval" to something more than zero, 5-15 seconds or so, map object to sensor value. If it tells you that support for this device is not implemented, please contact our support. Family ID 10 is supported in current beta firmware.

Hello
No I get no configuration when I click the Sensor. It is possible to get the beta firmware for testing.

Thanks Alex
Find
Reply
admin Offline
Administrator
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation: 447
#4
15.01.2016, 13:13
Send an e-mail to our support then, we will provide a link to beta FW.
Find
Reply
Auzzii Offline
Junior Member
Posts: 21
Threads: 10
Joined: Sep 2015
Reputation: 0
#5
26.02.2016, 08:52
Hi,
there are 2 types of sensors DS18B20 and DS18S20.
On my LM4 version 20150917 only works DS18B20 sensor.


[Image: n1nOrJe.png]

http://imgur.com/a/t5wfd
Find
Reply
edgars Offline
Administrator
Posts: 429
Threads: 100
Joined: Jun 2015
Reputation: 45
#6
26.02.2016, 10:43
the new upcoming firmware will have support for both of these sensors.
Find
Reply
andeug Offline
Member
Posts: 92
Threads: 9
Joined: Sep 2015
Reputation: 1
#7
08.08.2016, 09:58 (This post was last modified: 08.08.2016, 10:00 by andeug.)
Hi Edgars,

Can you confirm that the support for both sensors has been added in LM4 RC Version: 20160714? I have installed this software on my LM4 and it works just perfect.

Andreas
Find
Reply
admin Offline
Administrator
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation: 447
#8
08.08.2016, 10:09
Both sensors are supported, if you are missing any profiles for other 1-Wire devices we can add them by request.
Find
Reply
Igor68 Offline
Member
Posts: 59
Threads: 3
Joined: Nov 2016
Reputation: 0
#9
12.11.2017, 06:04
Hi, please, tell me if there will be further support for the 1-Wire? It is possible to support other digital sensors, for example, a pressure sensor BMP 180?
Find
Reply
admin Offline
Administrator
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation: 447
#10
12.11.2017, 08:08
BMP180 uses i2c, not 1wire. For all supported 1wire devices see this list: http://owfs.org/index.php?page=family-code-list
Devices that are not available as profiles in 1wire mapper can still be read from scripts.
Find
Reply
Igor68 Offline
Member
Posts: 59
Threads: 3
Joined: Nov 2016
Reputation: 0
#11
13.11.2017, 10:20
Thank you!
Find
Reply


Forum Jump: