Convert from Wh to Kwh

[Domoticatorino]

Hi there,
what's wrong with this below?

Consumo_impianto = grp.getvalue('3/3/30')
os.sleep(0.5)
Consumo_ftv_fase_1 = grp.getvalue('3/3/24')
os.sleep(0.5)
Consumo_ftv_fase_2 = grp.getvalue('3/3/25')
os.sleep(0.5)
Consumo_ftv_fase_1 = grp.getvalue('3/3/26')
os.sleep(0.5)
Consumo_pdc = grp.getvalue('3/3/27')
os.sleep(0.5)
Consumo_impianto_kwh = (Consumo_impianto / 1000)
os.sleep(0.5)
Consumo_ftv_fase_1_kwh = (Consumo_ftv_fase_1 / 1000)
os.sleep(0.5)
Consumo_ftv_fase_2_kwh = (Consumo_ftv_fase_2 / 1000)
os.sleep(0.5)
Consumo_ftv_fase_3_kwh = (Consumo_ftv_fase_3 / 1000)
os.sleep(0.5)
Consumo_pdc_kwh = (Consumo_pdc / 1000)
os.sleep(0.5)
grp.write ('3/3/121', Consumo_impianto_kwh)
os.sleep(0.5)
grp.write ('3/3/124', Consumo_ftv_fase_1_kwh)
os.sleep(0.5)
grp.write ('3/3/125', Consumo_ftv_fase_2_kwh)
os.sleep(0.5)
grp.write ('3/3/126', Consumo_ftv_fase_3_kwh)
os.sleep(0.5)
grp.write ('3/3/127', Consumo_pdc_kwh)

Nothing write.

Thanks.

[Erwin van der Zwart]

Hi,

Are you using modbus templates? If yes you can add a scale factor in the template.

BR,

Erwin

[Domoticatorino]

Hi Erwing,
no. Data comes from KNX (4 byte integer). Active Energy.

I remember that with an old version of Logic Machine there was not any problem. I cannot explain it.

Thanks.

[Erwin van der Zwart]

Have you logged the outcome?

Maybe you need to round it with math.round(value, 0)

You can also remove the delay’s on all items that are not grp.write related.

BR,

Erwin

[Domoticatorino]

OK Done. Thank you!!