This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Connection and Coonfiguration
#11
(03.08.2018, 09:29)Daniel. Wrote: If you would have TP topology then you would use line coupler between 1.1 and 1.0 and only 1 HL on line 1.0. You would have to open filter table on the coupler for HL to see telegrams on 1.1

Tunneling (hardly ever used) - when you have another KNX IP router and you want to connect only to the line of this IP router. The same like in ETS
Tunneling NAT - Theoretically should be able to connect over the net to IP router. Like in ETS
Routing - When you have several IP routers and one HL then you do not connect it to TP only to Ethernet and HL will see all telegrams sent to multicast. This is also enabled when TP UART mode is used but in this case HL do not listen to anything on TP.

If you would have TP topology then you would use line coupler between 1.1 and 1.0 and only 1 HL on line 1.0. You would have to open filter table on the coupler for HL to see telegrams on 1.1. (Can be the line coupler a HL or not? Meaning one HL in 1.0 and one HL in 1.1 as line coupler or not?))

Good practice is to add in ets a IP router in place 1.1.0 and 1.2.0 and then you can read back filter table from ETS and paste it to HL.
And last how can I add a HL in ETS as IP Router when there is no HL database for ETS?
Reply


Messages In This Thread
Connection and Coonfiguration - by XSPA2474KW - 29.07.2018, 10:47
RE: Connection and Coonfiguration - by AEK - 30.07.2018, 08:08
RE: Connection and Coonfiguration - by Daniel - 03.08.2018, 07:49
RE: Connection and Coonfiguration - by Daniel - 03.08.2018, 08:23
RE: Connection and Coonfiguration - by Daniel - 03.08.2018, 09:07
RE: Connection and Coonfiguration - by Daniel - 03.08.2018, 09:29
RE: Connection and Coonfiguration - by XSPA2474KW - 03.08.2018, 09:33
RE: Connection and Coonfiguration - by Daniel - 03.08.2018, 09:39
RE: Connection and Coonfiguration - by Daniel - 03.08.2018, 09:59
RE: Connection and Coonfiguration - by Daniel - 03.08.2018, 11:43
RE: Connection and Coonfiguration - by Daniel - 03.08.2018, 13:15
RE: Connection and Coonfiguration - by Daniel - 24.08.2018, 07:37
RE: Connection and Coonfiguration - by Daniel - 24.08.2018, 08:28
RE: Connection and Coonfiguration - by Daniel - 27.08.2018, 11:37
RE: Connection and Coonfiguration - by admin - 28.08.2018, 18:15
RE: Connection and Coonfiguration - by Daniel - 29.08.2018, 11:43
RE: Connection and Coonfiguration - by edgars - 29.08.2018, 12:01
RE: Connection and Coonfiguration - by edgars - 29.08.2018, 13:49
RE: Connection and Coonfiguration - by edgars - 30.08.2018, 08:57
RE: Connection and Coonfiguration - by edgars - 30.08.2018, 13:49
RE: Connection and Coonfiguration - by Daniel - 30.08.2018, 18:37

Forum Jump: