03.08.2018, 09:51
Dear Daniel
a quick summary.
1) Line 1.1 and line 1.2 over the Ethernet. I can' use main line. In line 1.1 I must have one HL and in line 1.2 I must have a second HL. In HL of 1.1 I must give KNX address in KNX settings 1.1.0 and in HL of 1.2 I must give 1.2.0. I must not have other products in both two lines (line coupler or ip router)
Also in ETS I must insert in line 1.1 an Ip Router with 1.1.0 (e.g. Schneider Ip router) and in line 1.2 an Ip router with 1.2.0 (e.g. ABB IP router)
Have I understood right?
2) TP Topology. Line 1.0 and line 1.1. I should have a HM in 1.0 and necessary a line coupler in 1.1.
Have I understood also right?
Thanks in advence for your help and your time
a quick summary.
1) Line 1.1 and line 1.2 over the Ethernet. I can' use main line. In line 1.1 I must have one HL and in line 1.2 I must have a second HL. In HL of 1.1 I must give KNX address in KNX settings 1.1.0 and in HL of 1.2 I must give 1.2.0. I must not have other products in both two lines (line coupler or ip router)
Also in ETS I must insert in line 1.1 an Ip Router with 1.1.0 (e.g. Schneider Ip router) and in line 1.2 an Ip router with 1.2.0 (e.g. ABB IP router)
Have I understood right?
2) TP Topology. Line 1.0 and line 1.1. I should have a HM in 1.0 and necessary a line coupler in 1.1.
Have I understood also right?
Thanks in advence for your help and your time