This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Scene Tab selecting a dimming object
#1
Hi,

Ok, go to the scene tab and add new scene,  give it name, now try to select a 4bit object as the trigger object.  This is not possible.  It would be useful to have this. 

Thanks,

Roger
Reply
#2
Hi
Why 4bit? usually it is a 1byte object.
BR
------------------------------
Ctrl+F5
Reply
#3
because we program our light switches to an generic group address and use the LM to recall the scenes stored. That way is a lot more flexible and there is no need to reprogram the light switch when adjustments are required. changes are made to the scene on the lm.

we have basalte light switches, each sensor is configured a dim, that gives two objects, a switching object and a 4bit dimming object. then I would have 3 scenes per sensor for dimming. each scene triggers on their respective dimming value 9,0 and 1. if you get what I mean.

thx,
Roger
Reply


Forum Jump: