[OLD] LogicMachine firmware 2019.10

[JakubTvrz]

Hi guys,
we have a problem with this new firmware on LM5 Reactor Dimmer KNX (i.MX6). When you want to switch or do anythink else in vizualization ( Mosaic 2.0, 3.0 or touch) there come no command on the bus. When you try this from the object list or either from ETS, it is working well. Do you have any ideas where can the problem ?

On what device do you have this problem? Is it local network?

This device https://openrb.com/logicmachine5-reactor-dimmer/  with KNX not CanX. The LM is on local network in our client's house and i am connected from outside through port redirection.