This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

Control KNX Dimmer lights with Alexa App
#1
When we configure a knx dimmable light in the alexa app in LM:

Should we create two devices: in the first device we configure a "power State" skill with the 1-bit KNX objects and in the second device we configure a "percentage" skill with the 1-byte objects?

Or, do we create a single device, with two skills, one for 1-bit objects in the power state skill and the other skill for 1-byte objects?

Thank you.
Reply
#2
One device and as many skills the device support.
Reply
#3
(08.09.2020, 13:17)Daniel. Wrote: One device and as many skills the device support.

Thanks Daniel, in the case of a KNX dimmabe light, what skill should we use: percentage or brightness?

I don't know what the difference is.
Reply
#4
They both are the same, the only difference is later label in alexa app on mobile if you use it.
Reply
#5
(08.09.2020, 14:25)Daniel. Wrote: They both are the same, the only difference is later label in alexa app on mobile if you use it.

Okay,

Thanks Daniel.
Reply


Forum Jump: