This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

PID regulator
#14
(01.02.2023, 10:28)admin Wrote: Do you need deadband for combined heating and cooling? One option is to have two PID scripts where only one is active at a time. For this you will need an extra object to for mode switch. You can also modify the PID library. Otherwise PID library should be modified to incorporate this.

Erwin's already described how to tune gain values.

I'm not using this as a heating PID, but a fancontroller. The PID transmits settpints to a frequency drive.
Reply


Messages In This Thread
PID regulator - by tomnord - 28.01.2021, 08:04
RE: PID regulator - by admin - 28.01.2021, 09:28
RE: PID regulator - by tomnord - 28.01.2021, 10:28
RE: PID regulator - by Daniel - 28.01.2021, 10:55
RE: PID regulator - by tomnord - 28.01.2021, 14:08
RE: PID regulator - by Daniel - 28.01.2021, 14:22
RE: PID regulator - by admin - 28.01.2021, 14:38
RE: PID regulator - by Erwin van der Zwart - 28.01.2021, 18:50
PID regulator - by tomnord - 29.01.2021, 15:36
RE: PID regulator - by tomnord - 01.02.2023, 09:33
RE: PID regulator - by admin - 01.02.2023, 09:37
RE: PID regulator - by tomnord - 01.02.2023, 10:05
RE: PID regulator - by admin - 01.02.2023, 10:28
RE: PID regulator - by tomnord - 01.02.2023, 11:42
RE: PID regulator - by admin - 01.02.2023, 12:03
RE: PID regulator - by tomnord - 01.02.2023, 12:44

Forum Jump: