This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

Logic Machine Ambient not taken upgraded img file
#1
We are attempting to flash firmware in LM Ambient, but whenever we try to flash the firmware an error shows up saying invalid file. Can you please share new firmware file with us. The fimware we tried to upload were.   
1) lmwall-20200720
2)lmwall-20170620

 We have followed instruction provided by the following link
https://openrb.com/reflash-logicmachine3...-software/
Reply
#2
In USBit you should use image recovery from here
https://openrb.com/firmwares/
Reply
#3
we get error while doing img rcovery."
"Cannot upgrade, firmware image file is invalid"
Reply
#4
Which hardware model exactly do you have? Which recovery image have you used?
Reply
#5
(25.02.2021, 07:36)admin Wrote: Which hardware model exactly do you have? Which recovery image have you used?

LM Ambient V1.2,1708,2501
1.lmwall20200720
2.lmwall20170620
Reply
#6
Can you find serial number? There should be a label on LAN port.
Reply
#7
(25.02.2021, 11:10)Daniel. Wrote: Can you find serial number? There should be a label on LAN port.

LM4LW_v1.4
LM4LWV141709323
Reply
#8
Use this recovery image
http://dl.openrb.com/recovery-imx6-1g.img.gz
and then this firmware
http://dl.openrb.com/lm-20-imx6/lmwallv2-20201111.img
Reply
#9
Please shaer the Recovery img. and Firmwar for following serial no.
LM4LW v1.4
LM4LWV142006184
Reply
#10
See Daniel's post, he has already provided both links that you need.
Reply


Forum Jump: