This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

High CPU Load
I have a high CPU Load. I look at the commands in processes app and there is a command KNX backend which loading the SL
What could be the issue.
Best Regards,
Check KNX TP and IP load. You might have a loop somewhere which causes a lot of traffic.
Thanks Admin
Here is the knx statistics screen shot.
I have IP Routers 
also I have two SL but they are not connected to the same TP

Attached Files Thumbnail(s)
Best Regards,
Do you have KNX/IP filtering enabled? Maybe there are many message on the IP backbone? If messages are filtered they won't appear in the statistics but might cause high CPU load.
Disable KNX/IP features and check if the load is still high. Then you can switch from KNX/TP to IP mode temporarily to check if KNX/TP is at fault.

Forum Jump: