This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Programming devices via ZeroTier
#21
(06.02.2024, 11:30)Daniel Wrote: Yes, see in KNX settings:  Pass ind. telegrams via IP Routing

Just to be sure If I have multiple IP Routers connected to the same VLAN
Router1: 1.1.0
Router2: 1.2.0
Router3: 1.3.0
Router4: 1.4.0
Router5: 1.5.0

And I Connect a LM to the same VLAN and set it to these settings and connect to it via ZeroTier, then i should be able to program all lines via ETS?[Image: 2MmzgBT.png]
Reply


Messages In This Thread
RE: Programming devices via ZeroTier - by Zen - 31.10.2023, 17:42
RE: Programming devices via ZeroTier - by AEK - 06.11.2023, 12:56
RE: Programming devices via ZeroTier - by AEK - 06.02.2024, 11:29
RE: Programming devices via ZeroTier - by Novodk - 11.04.2024, 18:17

Forum Jump: