14.02.2017, 11:21
Thank you both
Only small change for future use - the correct path is
new_path = '/scada/resources/icons/new_image.png'
You can change the webpage name (title) by -> System config -> System -> Hostname (default = LogicMachine), by doing this you also get the new name as prefix in your back-up's
- Yes, but this change changes the device name too. Which is something what I don't want to do because the device name must stay in our corporate format. But users like fancy names. So in my case buuuudzik's solution is better.
SSL cerificate is not possible (yet)...
- Please do it. This is a big problem for correct enterprise integration of LM.
Only small change for future use - the correct path is
new_path = '/scada/resources/icons/new_image.png'
You can change the webpage name (title) by -> System config -> System -> Hostname (default = LogicMachine), by doing this you also get the new name as prefix in your back-up's
- Yes, but this change changes the device name too. Which is something what I don't want to do because the device name must stay in our corporate format. But users like fancy names. So in my case buuuudzik's solution is better.
SSL cerificate is not possible (yet)...
- Please do it. This is a big problem for correct enterprise integration of LM.
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259