This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Button input
#1
Hi
I want to use button input to play/pause music and use wiring diagram of datasheet but it's not working. What should i do?
Huh
Reply
#2
did you enable specific button control in Quick Setup?
How did you connect wires (one wire to Button port, another to GND port?)
Reply
#3
(24.02.2017, 09:00)edgars Wrote: did you enable specific button control in Quick Setup?
How did you connect wires (one wire to Button port, another to GND port?)

yes i enabled them in Quick Setup
yes i connect one wire to button port and another to GND port 
Huh
Reply
#4
What power supply are you using? The button inputs were designed to work with 24V and might not work with lower voltage.
Reply
#5
(27.02.2017, 07:20)admin Wrote: What power supply are you using? The button inputs were designed to work with 24V and might not work with lower voltage.

ooooh i use 12v power supply. I will change it. thanks
Reply


Forum Jump: