This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Max Poll interval
#1
Hi
What is the biggest allowed poll interval for object?
80s works. 360s doesn't work.
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Reply
#2
I don't understand it. Today I set 600s poll interval and it works. Does it depend on something?
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Reply
#3
Any change in objects causes group monitor reload which resets poll timers. The maximum poll time is 3600 seconds.
Reply
#4
I mean manual changes of object properties via UI, not object values.
Reply
#5
That's it. Firstly when I tested it I modified units etc. Thank you.
BTW change of the object value from KNX bus doesn't reset the poll timer? For example reply to a read request triggered by another device?
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Reply
#6
No, it just sends the read telegram once timer expires and timer is not reset by any kind of telegram.
Reply


Forum Jump: