How to control the KNX bus via SMS and send notices via SMS?

[zoltan]

Do you have this code in init script?

Code:

os.execute('echo 1 > /sys/bus/platform/devices/ci_hdrc.0/force_full_speed')
os.execute('echo 1 > /sys/bus/platform/devices/ci_hdrc.1/force_full_speed')
os.execute('usbreset /dev/bus/usb/001/001')

Yes, I've used the description and files from post #3 in this thread. 

I did some additional testing today (I have restricted access to the site, by navigating a non-technical person by phone), and it looks like the USB hub may be the source of the problem. The Raspberry Pi community have a long list of problematic USB hubs, some of them dropping ports when high power device is attached.
I have this installed, and from description it could be problematic. Anyway, I have to wait until tomorrow to test it further.