Logic Machine Forum
[OLD] LogicMachine firmware 2017.04 - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: Announcements (https://forum.logicmachine.net/forumdisplay.php?fid=7)
+--- Forum: Software updates (https://forum.logicmachine.net/forumdisplay.php?fid=13)
+--- Thread: [OLD] LogicMachine firmware 2017.04 (/showthread.php?tid=752)

Pages: 1 2 3 4

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - Erwin van der Zwart - 04.05.2017

Hi,

No for HL you need a different image, i will PM you my mailadress so we can exchange it.

BR,

Erwin

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - bmodeco - 04.05.2017

Hi Edgars,
I was using your bluetooth script (using function ble.scan(callback)) for presence-detection - it worked fine.
After upgrading to RC1 it stopped working: I did install the correct pkg again - no errors there and BLE-tab showing up in the GUI. The script runs fine with no errors but no bluetooth devices are found - no errors are showing up either. Tried rebooting and unplugging/plugging bluetooth stick (BL from Lairdtech).
Any ideas?
Thanks Bart

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - forsterm - 05.05.2017

Hi,

after updateting spaceLYnk to firmware version 2.0.0.
I don't have access to the bacnet settigns dialog any more.

   


At firmware version 1.2.1 I had access to the bacnet settings dialog.

   

   

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - Erwin van der Zwart - 05.05.2017

Hi,

Try clearing browser cache.

BR,

Erwin

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - buuuudzik - 05.05.2017

How about new firmware for Load Balancer? Maybe some good news for a finish of the week? Wink

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - admin - 05.05.2017

RC2 is planned for next week, we'll prepare FW for LB as well.

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - buuuudzik - 05.05.2017

Great Smile  Did you added something new then above list of changes(RC1)?

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - admin - 05.05.2017

Just a couple of minor bug fixes, any new features will go into next major release.

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - forsterm - 08.05.2017

(05.05.2017, 10:29)Erwin van der Zwart Wrote: Hi,

Try clearing browser cache.

BR,

Erwin


Hi,

clearing the browser cache solved the problem.

Thank you very much

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - admin - 08.05.2017

@bmodeco

Have you tried using the universal profile?
http://openrb.com/bluetooth-presence-detection-and-rssi

Can you post your presence script?

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - gjniewenhuijse - 09.05.2017

(04.05.2017, 13:41)Erwin van der Zwart Wrote: Hi,

No for HL you need a different image, i will PM you my mailadress so we can exchange it.

BR,

Erwin

I have the same problem with a HL 1.3.1

Upgrade isn't possible.
New object is removed after restart.
Logs are removed from 12-2016 after restart.

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - bmodeco - 09.05.2017

(08.05.2017, 08:53)admin Wrote: @bmodeco

Have you tried using the universal profile?
http://openrb.com/bluetooth-presence-detection-and-rssi

Can you post your presence script?

Hi admin,
I am using the script on thread : http://forum.logicmachine.net/showthread.php?tid=379&highlight=presence
It worked fine before RC1. Tried rebooting, unplugging and so on - no difference.
Thanks Bart

Code:
require('ble')

-- enable ble
ble.up()

list = {}

-- mac -> group address mapping
known = {
 ['88:0F:10:10:F2:8A'] = '1/1/1',
 ['88:0F:10:4A:2C:36'] = '1/1/2',
}

ctime = os.time()

function callback(addr)
 local now, delta

 now = os.time()
 delta = now - ctime

 if addr then
   if not list[ addr ] then
     log('BLE found ' .. addr)

     if known[ addr ] then
       grp.write(known[ addr ], true, dt.bool)
     end
   end

   list[ addr ] = now
 end

 -- check for missing devices each 5 seconds
 if delta < 0 or delta > 5 then
   for addr, time in pairs(list) do
     delta = now - time

     if delta < 0 or delta > 60 then
       log('BLE missing ' .. addr)
       list[ addr ] = nil

       if known[ addr ] then
         grp.write(known[ addr ], false, dt.bool)
       end
     end
   end

   ctime = now
 end
end

ble.scan(callback)


RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - Jørn - 11.05.2017

Unable to sort/filter any of the scenes in the scene tab. Could you add this in the next release? A real pain when trying to organize alot of them Wink
edit: The same really goes for trends/schedulers etc as well Wink
Have also noticed that in the other tabs, when filtering by category/tags, it only last for a couple of seconds, then all tags are showed again, haven't tried with another browser, but should work in Chrome i guess`?

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - admin - 11.05.2017

Scene filter is planned for the next version. Trends/schedulers are sorted by custom user-defined order.
Can you explain the issues with tags that you're having in more detail?

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - Jørn - 11.05.2017

(11.05.2017, 13:52)admin Wrote: Scene filter is planned for the next version. Trends/schedulers are sorted by custom user-defined order.
Can you explain the issues with tags that you're having in more detail?

When trying to filter scripts by category, it works for about a second or two, and then shows all of them again.

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - Mr.D - 11.05.2017

(11.05.2017, 14:39)joskilb Wrote:
(11.05.2017, 13:52)admin Wrote: Scene filter is planned for the next version. Trends/schedulers are sorted by custom user-defined order.
Can you explain the issues with tags that you're having in more detail?

When trying to filter scripts by category, it works for about a second or two, and then shows all of them again.

Hi,

I am seeing the exact same thing. 

BR,
Mr.D

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - admin - 12.05.2017

Thanks, will have a look at this issue

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - Thomas - 18.05.2017

Hi,
I've got a message "Cannot upgrade, firmware file is invalid"
Actual firmware 2017/04/07

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - admin - 18.05.2017

Are you sure you are selecting the correct firmware for your platform?
If is still does not work, run this script once and try installing again:
https://gist.github.com/jsopenrb/4ba040d83cd25d51bf70a0dbc6b74447

RE: [PRE-RELEASE] LogicMachine firmware 2017.04 - Thomas - 18.05.2017

(18.05.2017, 11:27)admin Wrote: Are you sure you are selecting the correct firmware for your platform?
If is still does not work, run this script once and try installing again:
https://gist.github.com/jsopenrb/4ba040d83cd25d51bf70a0dbc6b74447

I use this firmware. Is it correct?
LM5 lite: https://dl.openrb.com/lm-17/lm5m3-20170424.img

I run your script once. Then I tried to upgrade my firmware.  But the situation didn't change. Still the same message. Cannot upgrade firmware. Firmware image is invalid.
I'm sory, my mistake.
The correct file is LM5 lite: https://dl.openrb.com/lm-17-imx6/lm5m3-20170424.img
The file has the same name but is placed in a different directory.