[OLD] LogicMachine firmware 2017.04

[Erwin van der Zwart]

Hi,

No for HL you need a different image, i will PM you my mailadress so we can exchange it.

BR,

Erwin

[bmodeco]

Hi Edgars,
I was using your bluetooth script (using function ble.scan(callback)) for presence-detection - it worked fine.
After upgrading to RC1 it stopped working: I did install the correct pkg again - no errors there and BLE-tab showing up in the GUI. The script runs fine with no errors but no bluetooth devices are found - no errors are showing up either. Tried rebooting and unplugging/plugging bluetooth stick (BL from Lairdtech).
Any ideas?
Thanks Bart

[forsterm]

Hi,

after updateting spaceLYnk to firmware version 2.0.0.
I don't have access to the bacnet settigns dialog any more.

   


At firmware version 1.2.1 I had access to the bacnet settings dialog.

   

   

[Erwin van der Zwart]

Hi,

Try clearing browser cache.

BR,

Erwin

[buuuudzik]

How about new firmware for Load Balancer? Maybe some good news for a finish of the week?

[admin]

RC2 is planned for next week, we'll prepare FW for LB as well.

[buuuudzik]

Great   Did you added something new then above list of changes(RC1)?

[admin]

Just a couple of minor bug fixes, any new features will go into next major release.

[forsterm]

Hi,

Try clearing browser cache.

BR,

Erwin

Hi,

clearing the browser cache solved the problem.

Thank you very much

[admin]

@bmodeco

Have you tried using the universal profile?
http://openrb.com/bluetooth-presence-detection-and-rssi

Can you post your presence script?

[gjniewenhuijse]

Hi,

No for HL you need a different image, i will PM you my mailadress so we can exchange it.

BR,

Erwin

I have the same problem with a HL 1.3.1

Upgrade isn't possible.
New object is removed after restart.
Logs are removed from 12-2016 after restart.

[bmodeco]

@bmodeco

Have you tried using the universal profile?
http://openrb.com/bluetooth-presence-detection-and-rssi

Can you post your presence script?

Hi admin,
I am using the script on thread : http://forum.logicmachine.net/showthread...t=presence
It worked fine before RC1. Tried rebooting, unplugging and so on - no difference.
Thanks Bart

Code:

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253

require('ble') -- enable ble ble.up() list = {} -- mac -> group address mapping known = {  ['88:0F:10:10:F2:8A'] = '1/1/1',  ['88:0F:10:4A:2C:36'] = '1/1/2', } ctime = os.time() function callback(addr)  local now, delta  now = os.time()  delta = now - ctime  if addr then    if not list[ addr ] then      log('BLE found ' .. addr)      if known[ addr ] then        grp.write(known[ addr ], true, dt.bool)      end    end    list[ addr ] = now  end  -- check for missing devices each 5 seconds  if delta < 0 or delta > 5 then    for addr, time in pairs(list) do      delta = now - time      if delta < 0 or delta > 60 then        log('BLE missing ' .. addr)        list[ addr ] = nil        if known[ addr ] then          grp.write(known[ addr ], false, dt.bool)        end      end    end    ctime = now  end end ble.scan(callback)

[Jørn]

Unable to sort/filter any of the scenes in the scene tab. Could you add this in the next release? A real pain when trying to organize alot of them
edit: The same really goes for trends/schedulers etc as well
Have also noticed that in the other tabs, when filtering by category/tags, it only last for a couple of seconds, then all tags are showed again, haven't tried with another browser, but should work in Chrome i guess`?

[admin]

Scene filter is planned for the next version. Trends/schedulers are sorted by custom user-defined order.
Can you explain the issues with tags that you're having in more detail?

[Jørn]

Scene filter is planned for the next version. Trends/schedulers are sorted by custom user-defined order.
Can you explain the issues with tags that you're having in more detail?

When trying to filter scripts by category, it works for about a second or two, and then shows all of them again.

[Mr.D]

Scene filter is planned for the next version. Trends/schedulers are sorted by custom user-defined order.
Can you explain the issues with tags that you're having in more detail?

When trying to filter scripts by category, it works for about a second or two, and then shows all of them again.

Hi,

I am seeing the exact same thing. 

BR,
Mr.D

[admin]

Thanks, will have a look at this issue

[Thomas]

Hi,
I've got a message "Cannot upgrade, firmware file is invalid"
Actual firmware 2017/04/07

[admin]

Are you sure you are selecting the correct firmware for your platform?
If is still does not work, run this script once and try installing again:
https://gist.github.com/jsopenrb/4ba040d...dbc6b74447

[Thomas]

Are you sure you are selecting the correct firmware for your platform?
If is still does not work, run this script once and try installing again:
https://gist.github.com/jsopenrb/4ba040d...dbc6b74447

I use this firmware. Is it correct?
LM5 lite: https://dl.openrb.com/lm-17/lm5m3-20170424.img

I run your script once. Then I tried to upgrade my firmware.  But the situation didn't change. Still the same message. Cannot upgrade firmware. Firmware image is invalid.

---

I'm sory, my mistake.
The correct file is LM5 lite: https://dl.openrb.com/lm-17-imx6/lm5m3-20170424.img
The file has the same name but is placed in a different directory.