I would like to use LM5 as a SIP server.

[Takayuki Miura]

Hello!

I would like to use LM5 as a SIP server to relay communication between two SIP Devices.

Specifically, I would like to use one doorbird and one phone.

If the IP addresses of each device are as follows, what kind of environment should I build?

LM5: 192.168.0.11

Doorbird: 192.168.0.27

Phone: 192.168.0.51

I have only completed the [SIP package installation on LM] by following the link below.

https://openrb.com/sip-server-on-logicmachine/


I look forward to your reply.

Thanks,

[admin]

On both clients set server IP to LM IP. Username should be a unique numeric value, no password. Clients can make calls between each other using username as a phone number.

[Chandrias]

On both clients set server IP to LM IP. Username should be a unique numeric value, no password. Clients can make calls between each other using username as a phone number.

I tried to register my devices with these settings but I get a "Registration Failed" message on both of them.
Is there a way to troubleshoot and see where thinks are not working properly?

[Chandrias]

On both clients set server IP to LM IP. Username should be a unique numeric value, no password. Clients can make calls between each other using username as a phone number.

I don't think that the issue has to do with my network. I connected all devices to a new network and the still can not register to the SIP Server

[Daniel]

Unfortunately there is nothing more we can suggest then the instructions here.
https://kb.logicmachine.net/integration/sip-server/
It is very basic SIP server but many customers use it with a success.

[Chandrias]

Unfortunately there is nothing more we can suggest then the instructions here.
https://kb.logicmachine.net/integration/sip-server/
It is very basic SIP server but many customers use it with a success.

I moved both devices at my residence and i managed to configure the server and register the devices.
Is there a way to confirm that my office server runs the required processes?

[Daniel]

Are you sure that LM in your office has internet access? Without internet access LM cannot install the packages.