Posts: 411
Threads: 103
Joined: Oct 2016
Reputation:
9
Hi
I have lost last 30 minutes of my trends after a short (few seconds) blackout. Is it a bug? Can I set a shorter time between two database savepoints?
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Posts: 68
Threads: 3
Joined: Jun 2016
Reputation:
0
Hi Thomas,
It's not a bug.
To save I/O cycle on the memory data are saved only every 30min. So if a blackout occur in between you'll loose up to 30min of data.
If you have repeated blackout, you could use a capacitor as a backup power support for short power lose.
Posts: 1772
Threads: 6
Joined: Jul 2015
Reputation:
118
Hi,
If you would be able to set a shorter interval between 2 data save periods your lifetime of the SD card would decrease heavely so this is not possible and also not wishfull.
If you need this data you could export it every x period but best and easiest way to be sure is to place a UPS.
BR,
Erwin
Posts: 411
Threads: 103
Joined: Oct 2016
Reputation:
9
Thank you for your reply. Does LM offer a backup for 24V line? In case you don't produce it, do you have any tip for such product? Ideally for DIN mounting.
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259