This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.
Logic Machine Forum › Announcements › Software updates v
[OLD] LogicMachine firmware 2017.06

Thread Closed 
Threaded Mode
[OLD] LogicMachine firmware 2017.06
simen@saasprosjekt.no Offline
Junior Member
Posts: 8
Threads: 0
Joined: Oct 2020
Reputation: 0
#61
19.10.2020, 10:29
Hello,

I am struggling with updating, the LM says "Cannot upgrade, firmware image file is invalid".

The reason i want to upgrade the firmware is that the device wont import new addresses from ETS via a ETS export anymore, I need to to that manually (dont know why). 
I have tried running the script for updating, but not sure if I am doing it the right way since nothing changes.
Find
Daniel Offline
Administrator
Posts: 4634
Threads: 24
Joined: Aug 2017
Reputation: 207
#62
19.10.2020, 11:45
(19.10.2020, 10:29)simen@saasprosjekt.no Wrote: Hello,

I am struggling with updating, the LM says "Cannot upgrade, firmware image file is invalid".

The reason i want to upgrade the firmware is that the device wont import new addresses from ETS via a ETS export anymore, I need to to that manually (dont know why). 
I have tried running the script for updating, but not sure if I am doing it the right way since nothing changes.
Your card is probably in read only mode and needs replacement.
------------------------------
Ctrl+F5
Find
simen@saasprosjekt.no Offline
Junior Member
Posts: 8
Threads: 0
Joined: Oct 2020
Reputation: 0
#63
19.10.2020, 11:48
(19.10.2020, 11:45)Daniel. Wrote:
(19.10.2020, 10:29)simen@saasprosjekt.no Wrote: Hello,

I am struggling with updating, the LM says "Cannot upgrade, firmware image file is invalid".

The reason i want to upgrade the firmware is that the device wont import new addresses from ETS via a ETS export anymore, I need to to that manually (dont know why). 
I have tried running the script for updating, but not sure if I am doing it the right way since nothing changes.
Your card is probably in read only mode and needs replacement.


What card? The LM was installed 2 years ago, and last week we were going to implement som changes in the KNX group adresses and need those exported to BACnet.
Find
admin Offline
Administrator
Posts: 7757
Threads: 42
Joined: Jun 2015
Reputation: 447
#64
19.10.2020, 11:49
Check that firmware is meant for the hardware that you have
Find
simen@saasprosjekt.no Offline
Junior Member
Posts: 8
Threads: 0
Joined: Oct 2020
Reputation: 0
#65
19.10.2020, 11:55
(19.10.2020, 11:49)admin Wrote: Check that firmware is meant for the hardware that you have

It is a LM5 lite from 2018, i have tried all off the LM5 FW, all of them says the same error message a couple of seconds after i try to upload the FW.
Find
admin Offline
Administrator
Posts: 7757
Threads: 42
Joined: Jun 2015
Reputation: 447
#66
19.10.2020, 11:56
LM5 can have either old or new cpu, which fw exactly have you tried?
Find
simen@saasprosjekt.no Offline
Junior Member
Posts: 8
Threads: 0
Joined: Oct 2020
Reputation: 0
#67
19.10.2020, 12:00
(19.10.2020, 11:56)admin Wrote: LM5 can have either old or new cpu, which fw exactly have you tried?


turns out i tried the same FW as the product already had installed..  Idea Confused

I tried now with the "pre-release", that seems to be updating now.

Hope this solves the import problem from ETS.
Find
Thread Closed 


Forum Jump: