KNX/TP Error tag

[eirik]

Does anyone made a script for error reporting on the KNX/TP?

I think I've seen it on this forum, but can't find it when it's needed

Eirik

[Daniel]

Hi
Try this

Code:

1234567891011

function check()  local delta, wdt    wdt = io.readfile('/tmp/tpuart.wdt') or ''    wdt = tonumber(wdt) or 0    delta = os.time() - wdt  return delta <= 10 end checktp = check() log(checktp)

[Trond Hoyem]

Hi
Try this

Code:

1234567891011

function check()  local delta, wdt    wdt = io.readfile('/tmp/tpuart.wdt') or ''    wdt = tonumber(wdt) or 0    delta = os.time() - wdt  return delta <= 10 end checktp = check() log(checktp)

Hi

I have some issue with the connection to TP. It toggles between ERROR/OK all the time. 

Any idea what causes this behavior? I have set the electrician to check the connection to see if there is some idmissable connection, but if that is not the case, where to begin the search?

Edit; it seems I am able to send telegrams on the bus even when there is an error in the KNX/TP connection. When I try to change something, I do get a status feedback from the devices.

BR
Trond

[admin]

It might be a hardware issue. Which LM model are you using? Also measure bus voltage if possible.

[Trond Hoyem]

It might be a hardware issue. Which LM model are you using? Also measure bus voltage if possible.

It is a SpaceLYnk of the HW 1. If I am not mistaken, the FW is 2.1.0

[Daniel]

It might be a hardware issue. Which LM model are you using? Also measure bus voltage if possible.

It is a SpaceLYnk of the HW 1. If I am not mistaken, the FW is 2.1.0

There was a bug in this FW, install any new and problem will be solved.