This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

bacnet alarm
#1
Good morning
I have a question: I am monitoring a device through the LogicMachine device using the bacnet-client APP but I have not been able to generate an alarm that indicates the absence of the baCnet (disconnection of the ethernet cable).

Attached Files Thumbnail(s)
   
Reply
#2
This app doesn't have any alarm features but if you would use our script solution then you can also see the error.
https://kb.logicmachine.net/libraries/bacnet-client/
------------------------------
Ctrl+F5
Reply
#3
PERFECT!! THANK YOU VERY MUCH.
Reply
#4
Hello,
 Could someone share the BaCnet client file to install on a LogicMachine that does not have internet.
Reply
#5
Which firmware and CPU do you have?
------------------------------
Ctrl+F5
Reply
#6
(21.02.2024, 17:42)Daniel Wrote: ¿Qué firmware y CPU tienes?
firmware V 2.8.3
CPU: ARMv7 processor 5 (v7l)
Reply
#7
You cannot install our packages on SE hardware, this is not an app.
------------------------------
Ctrl+F5
Reply
#8
(21.02.2024, 18:13)Deison Taborda Wrote:
(21.02.2024, 17:42)Daniel Wrote: ¿Qué firmware y CPU tienes?
firmware V 2.8.3
CPU: ARMv7 processor 5 (v7l)

Try this one
.ipk   bacnet-client.ipk (Size: 2.24 MB / Downloads: 4)
Reply


Forum Jump: