This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.
Logic Machine Forum › LogicMachine eco-system › Hardware v
Port USB LogicMachine connected to 3G/4G Modem Router

Threaded Mode
Port USB LogicMachine connected to 3G/4G Modem Router
batistacaceres Offline
Member
Posts: 65
Threads: 14
Joined: Mar 2017
Reputation: 0
#1
23.08.2018, 10:04
Its possible programming an KNX installation connecting one USB 3G/4G Modem Router to the USB port in LogicMachine?. For Example (Huawei E355 GSM/3G/4G Mobile Hotspot Router Modem, connected to LogicMachine USB port, and that LogicMachine supply us KNXNetIP protocol, to program an knx instalation using the ETS.

best regards
Find
Reply
edgars Offline
Administrator
Posts: 429
Threads: 100
Joined: Jun 2015
Reputation: 45
#2
23.08.2018, 10:17
USB 3G dongle can be used in LM as SMS send/receive transmitter. No 3/4G router functionality.
We have made LogicMachine with 3G modem on-board. In this case it acts as router. And if your GSM provider assigns you public IP, you can use it to connect remotely and configure your KNX network. More info on this LM will follow shortly.
Find
Reply
batistacaceres Offline
Member
Posts: 65
Threads: 14
Joined: Mar 2017
Reputation: 0
#3
23.08.2018, 10:43
(23.08.2018, 10:17)edgars Wrote: USB 3G dongle can be used in LM as SMS send/receive transmitter. No 3/4G router functionality.
We have made LogicMachine with 3G modem on-board. In this case it acts as router. And if your GSM provider assigns you public IP, you can use it to connect remotely and configure your KNX network. More info on this LM will follow shortly.

Thank you very much, I will appresiate a lot that device, I hope it comming soon.

best regards
Find
Reply


Forum Jump: