Posts: 1764
Threads: 6
Joined: Jul 2015
Reputation:
117
08.10.2018, 22:47
(This post was last modified: 08.10.2018, 22:47 by Erwin van der Zwart.)
Hi Daniel,
Can we also add a option inside the widgets to set a min/max value on sliders?
Now we can't limit the range off what a slider can send in widgets as it doesn't use the vis-object settings..
BR,
Erwin
Posts: 429
Threads: 100
Joined: Jun 2015
Reputation:
45
Hi Erwin,
this is already implemented. And much much more 
Posts: 232
Threads: 57
Joined: May 2018
Reputation:
3
Exciting  Is there altso a possibility to have a button which only sends a 1 or a 0 to a group adress?
BR
Kai-Roger
BR
Kai-Roger
Posts: 4663
Threads: 24
Joined: Aug 2017
Reputation:
213
Hi
Lets move the Mosaic discussion here as this thread is about RC1 FW.
https://forum.logicmachine.net/showthrea...ght=mosaic
I will answer your question there
BR
------------------------------
Ctrl+F5
Posts: 88
Threads: 19
Joined: Aug 2016
Reputation:
1
Hi!
When i upgrade to this, do i need to learn all my DALI lamps again? Or should backup take care of this?
Posts: 4663
Threads: 24
Joined: Aug 2017
Reputation:
213
(09.10.2018, 12:32)Bobby Wrote: Hi!
When i upgrade to this, do i need to learn all my DALI lamps again? Or should backup take care of this?
It is part of backup but this version has a bug in dali discovery so if you want to scan network again you have to manually install dali ipk again.
------------------------------
Ctrl+F5
Posts: 88
Threads: 19
Joined: Aug 2016
Reputation:
1
Posts: 14
Threads: 5
Joined: Apr 2017
(09.10.2018, 06:58)edgars Wrote: Hi Erwin,
this is already implemented. And much much more
I'm using LM5p-RIOLE and I need the firmware for it. Please help me 
Tks you
Posts: 429
Threads: 100
Joined: Jun 2015
Reputation:
45
please send me in private message your device serial number, I will give you direct upgrade firmware link.
Posts: 14
Threads: 5
Joined: Apr 2017
(22.10.2018, 06:03)edgars Wrote: please send me in private message your device serial number, I will give you direct upgrade firmware link. Hi Edgars,
Thank you, I sent the message to your inbox
Posts: 87
Threads: 13
Joined: Oct 2015
Reputation:
6
Any update on a final release ?
Thanks
Posts: 6
Threads: 1
Joined: Aug 2017
Reputation:
0
Which firmware should i install for a LM5 Power DW1?
Posts: 7782
Threads: 42
Joined: Jun 2015
Reputation:
448
@npinguin, RC2 will be released soon, we'll see how it goes from there
@delitero, you need LM5 Power with extensions
Posts: 400
Threads: 88
Joined: Jul 2016
Reputation:
3
Hi,
where can I read on my LM if the CPU is new or old? Only to be sure to install the correct firmware.
Thanks.
Posts: 7782
Threads: 42
Joined: Jun 2015
Reputation:
448
System confg > Status > System status
Old CPU model: ARM926EJ-S rev 5 (v5l)
New CPU model: ARMv7 Processor rev 5 (v7l)
But you cannot install FW of wrong type anyway, it will be rejected.
Posts: 20
Threads: 5
Joined: Feb 2017
Reputation:
1
Please help.
I have tried to install the new firmware many times now but it always fail. First I got wrong image message, regardless of witch image I used. (I have LM5 DW1 so I think I should use LM5 Power with extensions).
I tried hard reset but nothing happened, actually when I restarted after the factory reset it was just as before, same firmware and settings. I finally tried to reflash http://openrb.com/reflash-logicmachine3-...-software/ but nothing happened, same thing, namely same firmware on SD card with same settings and everything. So I bought a new sd card.
Have reflashed and that worked but can not uppgrade firmware, it only spins (in the browser) have tried explorer, chrome, firefox all in privat but no result. Have tried old firmware and new but nothing.
Please help , am growing desperate.
Thanks!
Posts: 4663
Threads: 24
Joined: Aug 2017
Reputation:
213
(21.12.2018, 18:13)kenjirosama Wrote: Please help.
I have tried to install the new firmware many times now but it always fail. First I got wrong image message, regardless of witch image I used. (I have LM5 DW1 so I think I should use LM5 Power with extensions).
I tried hard reset but nothing happened, actually when I restarted after the factory reset it was just as before, same firmware and settings. I finally tried to reflash http://openrb.com/reflash-logicmachine3-...-software/ but nothing happened, same thing, namely same firmware on SD card with same settings and everything. So I bought a new sd card.
Have reflashed and that worked but can not uppgrade firmware, it only spins (in the browser) have tried explorer, chrome, firefox all in privat but no result. Have tried old firmware and new but nothing.
Please help , am growing desperate.
Thanks!
The firmware is correct for your LM. When you re-flashed why didn't you use RC1 FW?
Do you see any message while trying to install?
------------------------------
Ctrl+F5
Posts: 20
Threads: 5
Joined: Feb 2017
Reputation:
1
When I reflashed I first used https://dl.openrb.com/recovery-imx6-1g.img.gz then when I have reinstalled the sd in LM i tried to upgrade the FW via the web interface ie 192.168.0.10. I have then tried all FW from 2017 to the latest RC2 via the web interface.
Usually when upgrading there are no messages it just keeps "loading/spinning" and if I hit the refreash in my browser I am back at the same page but without the "upgrade firmware or loading". It´s like nothing happened.
A few time I have recieved a message something like "wrong image...."
Can I use the RC1 FW to reflash the sd in the computer? Perhaps that would work, if possible.
Posts: 4663
Threads: 24
Joined: Aug 2017
Reputation:
213
Yes you can, maybe you used wrong fw while flashing
------------------------------
Ctrl+F5
Posts: 20
Threads: 5
Joined: Feb 2017
Reputation:
1
Tried reflashing with RC1 FW for my LM5 DW1 (so I used LM5m3x) but the LM completely died. No light no LEDs.
Flashed with my old backup and its back again.
Problem with my old FW is that I cannot install anything, no apps etc.
So back to square one. But thank you for trying!!
|
