Sip server

[benanderson_475]

Hi, 

i have configured the sip server as per http://openrb.com/sip-server-on-logicmachine/

i have Linphone app installed on phone, displaying a connected state.  
How do i configure the server for additional sip door entry units to communicate with the server? (user, password etc)


many thanks

[s.prathmesh]

In LM's Users tab, you can add users with respective usernames and passwords. The same you need to put in Linphone app. Remember that the usernames should be numerical.

[benanderson_475]

  Thanks, 
I have it working now,

[Thomas]

Hi
I see there's a SIP server there. Can this server trigger an GO based action? And vice versa can GO trigger SIP server action?

Could we have SIP client too? I mean a piece of code which can answer SIP call, authorize the user (by pnone number, PIN) and do a simple action like opening door etc triggered by dialed tones?
It would be great and I think cheap improvement.

[Erwin van der Zwart]

My experience with SIP clients in browsers (WebRTC) is that they require WSS and that means  SSL certificates and everyting, it's not a cheap add on and certainly not simple..

BR,

Erwin

[Thomas]

My experience with SIP clients in browsers (WebRTC) is that they require WSS and that means  SSL certificates and everyting, it's not a cheap add on and certainly not simple..

BR,

Erwin

I meant SIP client running on LM. Not web based SIP client.

[Erwin van der Zwart]

And the LM is not web based?