traffic light effect

[Nir70]

Hello 
Is it possible to create 4-5 lamps that will work like a traffic light, one turns on and the other turns off in cycles? If the enable option is disabled . Thanks

[admin]

Use this resident script. Sleep time controls when the next lamp will be turned on. Any number of objects can be specified.

Code:

objects = {
  '0/0/1',
  '0/0/2',
  '0/0/3',
}

curr = (curr or 0) + 1

if curr > #objects then
  curr = 1
end

if prev then
  grp.checkwrite(objects[ prev ], false)
end

grp.checkwrite(objects[ curr ], true)
prev = curr

This script can be enabled/disabled from a different script using these functions: https://kb.logicmachine.net/libraries/lu...enablename

[Nir70]

Use this resident script. Sleep time controls when the next lamp will be turned on. Any number of objects can be specified.

Code:

objects = {
  '0/0/1',
  '0/0/2',
  '0/0/3',
}

curr = (curr or 0) + 1

if curr > #objects then
  curr = 1
end

if prev then
  grp.checkwrite(objects[ prev ], false)
end

grp.checkwrite(objects[ curr ], true)
prev = curr

This script can be enabled/disabled from a different script using these functions: https://kb.logicmachine.net/libraries/lu...enablename

objects = {
  '1/0/51',
  '1/0/53', 
}

curr = (curr or 0) + 1

if curr > #objects then
  curr = 1
end

if prev then
  grp.checkwrite(objects[ prev ], false)
end

grp.checkwrite(objects[ curr ], true)
prev = curr

Hello, I put the data in this way, where do I see the time it is supposed to change, it doesn't work, I work with a Schneider LS 100 200 product, thanks

[Daniel]

Did you use resident script? The script interval defines the change.