Shutter Lock signal

[AndersH]

Hi.

Here is a simple script for your function.

value = grp.getvalue('1/1/1') -- upp/down adress

if value >= 0 or value <= 1 then

   grp.write('1/1/2', 1) -- lock automatics
end

---

sorry, delete the group adress in the first line.

value = grp.getvalue()

then put the script in up/down object.

Hi.
Thank you for the help...
I think i got it to work with some small modefy

value = grp.getvalue() -- upp/down adress
if value == upp or value == down then
  grp.write('10/1/2', true) -- lock automatics
end

Best regards
Anders

---

Since your UP/DOWN object is 1 bit and you don't care about the value there's no need for comparison.

Another point is that event.getvalue() should be used instead of grp.getvalue(). Since the return value for 1 bit objects is true/false then comparison with 0/1 will not work.

You just need one line in your script attached to UP/DOWN object, change 1/1/2 to your LOCK object address:

Code:

grp.write('1/1/2', true)

Is it so simple ??

Ha ha.... Yes it´s working with that simple line, amazing...

I also have a light color control via a template that the customer want´s to stop in the same way, if you use the manual dimming button, it must be possible
in the same type of script line ?!

//Anders