Blinds Control - Multiple Socket Connections Per Script

[jamesng]

Hi

I'm trying to control Somfy blinds by issuing an UP or DOWN command followed by a STOP command a few seconds later to achieve a partially open blind.  ie: to automatically open the blind 30%.


I'm making a socket connection to the Somfy controller - this works fine - however I don't seem be able to send two separate commands over two socket connections from the one event-based script.  The second sendCommand never gets sent.  The controller is able to receive multiple commands ok when triggered from separate buttons / scripts within the same timeframe.

Is there a different way to code this so that the LUA sends the second command?   

Thanks in advance
 
Kind Regards
James



FUNCTION

Code:

function sendCommand(command)
  local socket = require("socket").tcp()
  data, err = socket:connect('192.168.1.200', 4999)
  data, err = socket:send(command .. '\x0D\x0A') 
end

SCRIPT

Code:

BlindsTravel = 22; -- Time in seconds to fully open/close
BlindsStep = math.round(100/BlindsTravel);  -- Number of percentage steps to move per second
BlindsNewPosition = GetUserParam('Wired', 'BlindsNewPosition');
BlindsCurrentPosition = GetUserParam('Wired', 'BlindsCurrentPosition');

-- Move Blind Down / Open
if (BlindsNewPosition > BlindsCurrentPosition) then
 
  sendCommand('0113D\x0D\x0A'); -- Send down command
   
  while (BlindsNewPosition >= BlindsCurrentPosition) do
   
    -- Update current position of blind during movement 
    os.sleep(1)
    BlindsCurrentPosition = BlindsCurrentPosition + BlindsStep;
    SetUserParam('Wired', 'BlindsCurrentPosition-Study', BlindsCurrentPosition);
     
    -- Stop blind when blind has moved to new position
    if (BlindsCurrentPosition >= BlindsNewPosition) then
      sendCommand('0113S\x0D\x0A');  -- Send stop command (never gets sent)
    end;     
   
  end;

end;