irrigazione con sensore pioggi

[Hosutech]

Hi Hosutech,

I once made a very simple script for this. Please find a copy below. It's a start of what you need but you need to extend it with some extra functionality but that al are simple conditions i would say..

start_stop = grp.getvalue('15/2/0')      -- start stop
minuten    = grp.getvalue('15/2/1') -- time per section (minutes, byte value)
sectie_1  = grp.getvalue('15/2/3') -- section 1
sectie_2  = grp.getvalue('15/2/4') -- section 2
sectie_3  = grp.getvalue('15/2/5') -- section 3
sectie_4  = grp.getvalue('15/2/7') -- section 4

minuten = minuten * 60 -- time calculation to minutes

stored_pomp_pid = storage.get('storage_pomp_pid') 
if stored_pomp_pid == nil then
    pid = os.getpid()
  storage.set('storage_pomp_pid', pid)
else
    pid = os.getpid() 
  storage.set('storage_pomp_pid', pid) 
  os.kill(stored_pomp_pid, signal.SIGKILL)
end

if start_stop == true then
  if sectie_1 == true then
  grp.write('0/2/3', true)  -- section 1
    os.sleep(minuten)       -- time per section
  grp.write('0/2/3', false) -- section 1
  end
  if sectie_2 == true then
  grp.write('0/2/4', true)  -- section 2
    os.sleep(minuten)       -- time per section
  grp.write('0/2/4', false) -- section 2
  end       
  if sectie_3 == true then
  grp.write('0/2/5', true)  -- section 3
    os.sleep(minuten)       -- time per section
  grp.write('0/2/5', false) -- section 3
  end         
  if sectie_4 == true then
  grp.write('0/2/7', true)  -- section 4
    os.sleep(minuten)       -- time per section
  grp.write('0/2/7', false) -- section 4
  end           
else
  grp.write('0/2/3', false) -- section 1
  grp.write('0/2/4', false) -- section 2
  grp.write('0/2/5', false) -- section 3
  grp.write('0/2/7', false) -- section 4
end

Thanks JOEP
I try your script and let you know.
To make good

---

Here's a similar script that has configurable enable and timer value via objects:
https://forum.logicmachine.net/showthrea...61#pid8161

well thanks, I try it and let you know