script for scene change

[Vik]

Attach your scenes to 1 byte unsigned object with trigger value from 1 to 10. Create an event script for scene up/down (1 bit). Change scene trigger object (32/1/17) as needed.

Code:

out = '32/1/17' up = event.getvalue() nr = grp.getvalue(out) if up then   nr = nr + 1   if nr > 10 then     nr = 1   end else   nr = nr - 1   if nr < 1 then     nr = 10   end end grp.update(out, nr)

Thank you for this. it worked fine.

---

Just create event script on the dim object, change group as needed and if the disable value is 0 then change true to false

Code:

-- write value (e.g. boolean 'true') to object with group address 1/1/1, datatype must be set for this object grp.write('1/1/1', true)

Thanks a lot for this. This worked fine too.