15.03.2023, 10:06
Hello, I am configuring a new LM5p2-KC device updated to the latest firmware and I have connected a CAN dali gateway. Everything is well connected but when searching for the device, it tells me this message.
'Failed to communicate with the device. Make sure that it is powered on and CAN bus is connected'
I have 24V on the dali gateway input and 4.9V on the CAN bus
'Failed to communicate with the device. Make sure that it is powered on and CAN bus is connected'
I have 24V on the dali gateway input and 4.9V on the CAN bus