[OLD] LogicMachine firmware 2023.06

[Fahd]

LM firmware 2023.06 is ready.

This firmware fixes possible project loss when several power cycles happen in a short time period.

---

Users running 2023.04 can install an update package instead of a full firmware upgrade

Go to LogicMachine > Utilities > Install updates
update file | signature

---

You can find the hardware model in the "Upgrade firmware" window:



LM5 Power devices with i.MX6 CPU
LM5 Lite (3 DIN units): image file | signature
LM5 Lite + Ext (4 or 6 DIN units): image file | signature
LM5 Reactor GM KNX: image file | signature
LM5 Reactor GM CANx: image file | signature
LM5 Reactor Dimmer KNX: image file | signature
LM5 Reactor Dimmer CANx: image file | signature
LM5 Reactor IO V2: image file | signature
LM5 M4 (4 DIN units): image file | signature
LM Wall (Ambient V2): image file | signature

Extra packages (i.MX6 CPU)

---

Devices with old CPU (i.MX28)
LM2 IMX: image file | signature
LM3 V1 (4 x RS-485): image file | signature
LM3 V2 (3 x RS-485 and 1 x RS-232): image file | signature
LM4: image file | signature
LM5 Lite (3 DIN units): image file | signature
LM5 Lite + Ext (4 or 6 DIN units): image file | signature
LM5 4 DIN units: image file | signature
LM Wall (Ambient): image file | signature
LM Reactor Lite: image file | signature
LM Reactor V1: image file | signature
LM Reactor V2: image file | signature
LM Reactor V3: image file | signature

Extra packages (i.MX28 CPU)

Video tutorials: https://forum.logicmachine.net/showthrea...9#pid21069

When I attempted to upgrade the firmware on my LM5 SW: 20230420, I encountered an error stating that signature verification had failed. As you can see attached