[OLD] LogicMachine firmware 2023.06

[AEK]

You have LM with on-board flash that is used to store the database and trends. Looks like it was not detected during one boot and the project was "lost". If such issue happens again contact us for a repair/replacement. Make sure to backup LM project periodically.

Is there option to check the health of that flash? I don't see any reference in the system log, only this "mmcblk0: p1 p2 p3", but it's the SD-Card.

The LM is this:
HW: LM5 Reactor IO V2/V3 (i.MX6)
SW: 20230607

system config, status, system status, partitions


File system           Total size Used              Free        Mounted on
/dev/root              232.0M   22.5M (10%)  209.4M    /
tmpfs                   61.1M     5.9M (10%)    55.1M      /tmp
tmpfs                   4.0M       12.0K (0%)    4.0M        /dev
/dev/mmcblk0p3   6.9G        28.0M (0%)   6.9G        /data
/dev/mtdblock0     32.0M      7.0M (22%)   25.0M      /data/storage/db

  thats how internal flash is named